Click image to view full size image
BRTP06ISS0PC
Product lntroduction
The product is driven by air pressure, which is characterized by convenient air source, rapid action, simple structure, low cost and easy maintenance.
Product parameter(specification)
Model |
Power Source(KVA) |
Dry Take Out Time(sec) |
Dry Cycle Time(sec) |
Swing Angle(degree) |
Air Consumption(Nl/cycle) |
BRTP06ISS0PC |
0.1 |
1.6 |
5.5 |
30-90 |
3 |
Product feature and application
This product is suitable for 30t-150t horizontal injection molding machine to take out the finished products and nozzle; Especially suitable for taking out small injection molding objects, such as mouse shell, mobile phone shell, small toys, etc
Maintenance safety
(Caution) Before servicing the robot, maintenance personnel should read the following safety regulations in detail to avoid danger.
1. Before checking the injection machine, please turn off the power.
2. Before adjustment and maintenance, please turn off the power of the injection machine and the manipulator and the residual pressure of the manipulator.
3. Except for proximity switches, defective suction clamps, and solenoid valves that can be repaired by themselves, others should be repaired by professionally trained personnel, otherwise do not modify them without authorization.
4. Please do not arbitrarily replace or change original parts.
5. During the adjustment or replacement of the mold, please pay attention to safety to avoid being hit by the robot.
6. After adjusting or repairing the robot, please leave the dangerous work area before testing.
7. During maintenance, do not turn on the power or connect the air pressure source to the manipulator
http://www.borunte.net/